In exercise of the powers conferred by section 148 of the Kerala State Goods and Services Tax Act, 2017 (20 of 2017), the Government of Kerala, on the recommendations of the Council, hereby notifies the following special procedure to be followed by a registered person engaged in manufacturing of the goods, the description of which is specified in the corresponding entry in column (3) of the Schedule appended to this notification, and falling under the tariff item, sub-heading, heading or Chapter, as the case may be, as specified in the corresponding entry in column (2) of the said Schedule, namely:-
1. Details of Packing Machines.- (1) All the registered persons engaged in manufacturing of the goods mentioned in Schedule to this notification shall furnish the details of packing machines being used for filling and packing of packages in FORM GST SRM-I, electronically on the common portal,within thirty days of coming into effect of this notification.
(2) Any person intending to manufacture goods as mentioned in the Schedule to this notification, and who has been granted registration after the issuance of this notification, shall furnish the details of packing machines being used for filling and packing of packages in FORM GST SRM-I on the common portal, within fifteen days of grant of such registration.
(3) The details of any additional filling and packing machine being installed at the registered place of business shall be furnished, electronically on the common portal, by the said registered person within twenty four hours of such installation in PART (B) of Table 6 of FORM GST SRM-I.
(4) If any change is to be made in the declared capacity of the machines, the same shall be furnished, electronically on the common portal, by the said registered person within twenty four hours of such change in Table 6A of FORM GST SRM-I.
(5) Upon furnishing of such details in FORM GST SRM-I, a unique registration number shall be generated for each machine, the details of which have been furnished by the registered person, on the common portal.
(6) In case, the said registered person has submitted or declared the production capacity of his manufacturing unit or his machines, to any other government department or any other agency or organisation, the same shall be furnished by the said registered person in Table 7 of FORM GST SRM-I on the common portal, within fifteen days of filing such declaration or submission:
Provided that where the said registered person has submitted or declared the production capacity of his manufacturing unit or his machines, to any other government department or any other agency or organisation, before the issuance of this notification, the latest such certificate in respect of the manufacturing unit or the machines, as the case may be, shall be furnished by the said registered person in Table 7 of FORM GST SRM-I on the common portal, within thirty days of issuance of this notification.
(7) The details of any existing filling and packing machine disposed of from the registered place of business shall be furnished, electronically on the common portal, by the said registered person within twenty four hours of such disposal in Table 8 of FORM GST SRM-I.
2. Special Monthly Statement.- The registered person shall submit a special statement for each month in FORM GST SRM-II, electronically on the common portal, on or before the tenth day of the month succeeding such month.
3. Certificate of Chartered Engineer.- (1) The taxpayer shall upload a certificate of Chartered Engineer FORM GST SRM-III in respect of machines declared by him, as per para 1 of this notification, in Table 6 of FORM GST SRM-I.
(2) If details of any machine are amended subsequently, then fresh certificate in respect of such machine shall be uploaded.
4. This notification shall be deemed to have come into effect from the 1st day of April, 2024.
SCHEDULE
No.
Explanation.- (1) In this Schedule, "tariff item", "heading", "sub-heading" and "Chapter" shall mean respectively, a tariff item, heading, sub-heading and Chapter as specified in the First Schedule to the Customs Tariff Act, 1975 (51 of 1975).
(2) The rules for the interpretation of the First Schedule to the said Customs Tariff Act,1975, including
the section and chapter notes and the General Explanatory notes of the First Schedule shall, so far as may be, apply to the interpretation of this notification.
(3) For the purposes of this notification, the phrase "brand name" means brand name ortrade name,
whether registered or not, that is to say, a name or a mark, such as symbol, monogram, label, signature or invented word or writing which is used in relation to such specified goods for the purpose of indicating, or so as to indicate a connection in the course of trade between such specified goods and some person using such name or mark with or without any indication of the identity of that person.
FORM GST SRM-I
Registration and disposal of packing machines of pan masala and tobacco products
6. Details of the machines
available.
place of installation.
packed on the
machine (in grams).
each track
(No. of
packageswhich can be packed for a particular weight of
package).
machine for a
specific weight of package to be
packed.
machine per hour
(KWH).
machine (to be
autogenerated by the system).
(8x10)
6A. Amendment to the details of machines.
machine (in grams).
change in any parameter listed.
7. Details of the intimation of the machines furnished to other departments.
8. Disposal of the packing machines.
manufacturer.
installati-on.
tracks.
packages which can
be packed
for a
particular weight of
package)
machi-ne for a
specif-ic weigh-t of packa-ge to be
packe-d.
9. Product details.
10. Details of the Documents uploaded.
1. Certificate of chartered engineer.
2. Information given to other departments
3. Any other document to be mentioned by taxpayer.
11. Verification
I hereby solemnly affirm and declare that the information given hereinabove is true and correct to the best of my knowledge and belief and nothing has been concealed therefrom.
Signature of Authorised Signatory
Instructions to Form GST SRM-1
1 .Terms used:
(i) GSTIN: Goods and Services Tax Identification Number
(ii) HSN: Harmonized System of Nomenclature
(iii) MRP: Maximum Retail Price
(iv) KWH: Kilo Watt Hour
(v) Packing type: Pouch, Zipper etc.
2. Table 6: Details of existing machines should be provided in Part-A and details of new machines added thereafter have to be provided in Part-B. Column wise details of the information to be provided is given in the table below:
3. Table 6A: Amendment to the details of the machine already provided in Table 6 or amended thereafter to be provided. After entering registration number of the machine assigned by the System in column 12 of Table 6 , other details of the machine would be auto-populated. The same can be edited wherever required. Certificate of chartered engineer shall also be uploaded for the machines whose details have been amended if the particulars given in the certificate uploaded earlier undergoes any change and the details of the documents uploaded should be given in Table 10. Any such change in any of the details of the machine including its working status which needs to be amended, has to be communicated within twenty four hours of the said change carried out by the registered person.
4. Table 7: Details of the intimation of the machines furnished to other department have to be provided. Documents should be uploaded in pdf format after making entries and the details of the documents uploaded should be given in Table 10.
5. Table 8: Details of the machines disposed of (supplied /condemned) shall be provided. After entering registration number assigned to the machine by the System, other details would be auto-populated. Date of disposal and reason for the same to be provided.
6. Table 9: Details of the brands, packing type, HSN and description of the products manufactured to be provided in this table. If there is any change in the information already furnished in this table, the details need to be amended accordingly.
7. Table 10: List of Documents uploaded:
Single Certificate of chartered engineer to be uploaded in pdf format for all machines in the format as per FORM GST SRM-III after entering the particulars of the machines.
Certificate of chartered engineer, in the format as per FORM GST SRM-III, shall also be uploaded for the machines whose details have been amended if the particulars given in the certificate uploaded earlier undergoes any change.
Document in pdf format providing details of the intimation of the machines furnished to other department have to be uploaded.
FORM GST SRM-II
Monthly Statement of inputs used and the final goods produced by the manufacturer of goods specified in the Schedule
8. Details of inputs
(UQC)
the quantity procured (Rs.).
9. Details of production
grams in
each package.
product.
package packed. (Rs.)
10. Power consumption
11. Details of grid integrated solar power
12. Verification
Instruction to Form GST SRM-II
(v) DG set: Diesel Generator set used for power generation
(vi) Packing type: Pouch, Zipper etc.
2. Table 8: Details of inputs used for manufacturing the goods specified in Schedule appended with the notification, have to be provided. Column wise details of the information to be provided are given in the table below:
3. Table 9: Details of the products manufactured to be reported brand wise, machine wise and package wise. Column wise details of the information to be provided is given in the table below:
4. Table 10: Power consumption during the month to be reported. Initial reading of the electricity meter in the beginning of the month to be reported for the first month. From the next month onwards, the final reading reported at the end of previous month will become initial reading of the month. Reading of DG set used, if any should also be reported separately. For reporting the reading of more than one electricity meter or DG set, separate rows to be used. Also, electricity meter reading is to be given of the main meter of the manufacturing unit in case separate meter for
machines is not available. Solar power mentioned at PART C pertains to only that generated through batteries not integrated with the grid.
5. Table 11. Here, details of the power consumed from solar power integrated with the grid is to be reported.
FORM GST SRM-III
Certificate of Chartered Engineer
1. GSTIN -
2. Details of the machines for which certificate has been issued -
System (in
cases where the amendment in
specification of the machines in Table 6A to be done).
the machine per hour
This is to certify that I have examined --- (no.) machines and the above details are true and correct to the best of my knowledge and belief and nothing has been concealed therefrom.
By order of the Governor,
PRANABJYOTI NATH,
Secretary to Government.
Explanatory Note
(This does not form part of the notification, but is intended to indicate its general purport.)
On recommendations of the Goods and Services Tax Council, the Government have decided to notify special procedure to be followed by a registered person engaged in manufacturing of certain goods.
The notification is intended to achieve the above object.